GRG生产工艺

产品名称:GRG生产工艺

产品工艺: 

技术参数 


现价:

原价:

在线订购
数量:
-+

胜帆GRG生产工艺
Shengfan GRG production process
 

GRG生产工艺流程主要有以下六大步:
1.计算机编程
2.雕刻机雕刻模具
3.模具的组装制作
4.产品的喷射制作
5.产品脱模保养
6.产品包装运输

GRG production process mainly has the following six steps :
1. computer programmin
2.Engraving machine engraving mold
3. Mold assembly production
4. Production of the product
5. Product stripping maintenance
6. Product packaging transport


一、计算机编程:
        工厂的雕刻师傅根据CAD图纸,按照客户的要求和图纸上面标注的尺寸,进行编写计算机程序。需要雕刻的一般都是有造型的部位,不能使用平板来实现的部位。

一、Computer Programming :
       Factory carving master according to CAD drawings, in accordance with the requirements of customers and drawings marked above the size of the preparation of computer programs.Need to carve the general are the shape of the site, can not use the plate to achieve the site.




二、雕刻机雕刻模具:
        雕刻师把编写好的程序输入计算机,三维数控雕刻机就开始自动雕刻模具。一般雕刻的材料主要有木材、石膏、泡沫。

二、Engraving machine engraving mold :
        he engraver to write a good program into the computer, three-dimensional CNC engraving machine began to automatically engrave the mold.General carving materials are mainly wood, gypsum, foam.



三、模具组装制作
         模具制作的基本流程如下:
        1.放线---
        2.开料---
        3.订底台---
        4.补灰打模、喷漆---
        5.装订---
        6.交QC检货。

三、Mold assembly production
        The basic process of mold making is as follows :

        1.Line
        2.Open material
        3.Set the table
        4.Fill ash mold, paint
        5.Binding
        6.To QC 


四、模具的种类:
1.木模---使用次数多,可直接做木负模(使用20-50次)
2. 硅胶模---造价贵,主要用于雕花,不易脱模(使用20-30次)
3.玻璃钢模---使用次数多,造价比木模贵(使用100-200次)
4.石膏模---使用次数少(使用2-3次)
5.水泥模

四、The type of mold:
1. Wood mold --- the number of use, can be directly made of wood negative mold (using 20-50 times)
2. Silicone mold --- cost expensive, mainly used for carving, easy stripping (using 20-30 times)
3. FRP --- the use of more than the cost of wood than your (use 100-200 times)
4. Gypsum mold --- use less (use 2-3 times)
5. Cement mold


五、产品喷射制作:
       GRG的制作工艺主要有两种,一种是手糊工艺,另外一种是喷射工艺。我司制作的所有的产品,全部是喷射工艺制作。喷射工艺是GRG行业标准指定的制作工艺。喷射工艺制作出来的产品的质量和强度都是手糊工艺的几倍甚至几十倍以上。
 喷射工艺的主要步骤如下:
  1.清理模具---
  2.打脱模油---
  3.开料---
  4.喷制---
  5.背部收光---

五、Product jet production :
       GRG production process there are two, one is hand paste process, the other is the spray process.I produced all the products, all of the spray process production.The spray process is the GRG industry standard designation process.The quality and strength of the products produced by the spray process are several times or even several times more than the hand-paste process.
The main steps of the spray process are as follows :
  1.Cleaning mold---
  2.Playing off the oil---
  3.Open material---
  4.Sprayed---
  5.Back light---


六、产品脱模保养:GRG的产品脱模以后保养三天就可以
       产品包装运输:出厂的所有的产品,都需要进行良好的包装。首先用包装纸来包装,外部还需要用木卡来进行加固。运输方式一般有陆运和海运两种。如果条件和工期允许,首选海上运输。条件不允许的选择陆运。
六、Product stripping maintenance : GRG products can be lifted for three days after stripping
        Product packaging Transport : All the products of the factory need to be well packed.First with wrapping paper to packaging, the external also need to use wood to reinforce.There are two kinds of land transport and sea transport.If conditions and duration allow, preferred sea transport. Conditions are not allowed to choose land transport.

 

GRG生产工艺流程
GRG生产工艺流程图

------ 责任编辑:胜帆建材
------Editor: Sheng Fan building materials

版权所有http://www.shengfanjc.com(胜帆建材)转载请注明出处
All rights reserved http://www.shengfanjc.com (Sheng Fan building materials) reproduced please indicate the source

产品详细

全部评论(0)